Grout Stop prevents grout from falling through the block cores. This product comes in a standard size of CMU X 100′ rolls, offering a convenient, durable solution for masonry projects.

AVAILABLE IN:
-6″ for 8″ CMU x 100′ Rolls
-8″ for 10″ CMU x 100′ Rolls
-10″ for 12″ CMU x 100′ Rolls

The PlateGrip® – Surface Mounted – Bearing Plate Support Tie is a fast and efficient way to hold a surface-mounted embedded plate in place while grouting. It works on all common size CMU.

AVAILABLE IN: Standard sizes of 1/2″ and 5/8” diameter studs, with stud lengths of 4″, 5″, 6″, 7″ & 8″

FINISH: Mill Galvanized

The Clean-Out Cover system uses a reusable “Nut” and transparent “Window” made of durable polycarbonate, with a hard ABS plastic “T-Bolt” that easily breaks off after use. This efficient solution provides a quick, clean, and cost-effective way to form reinforced masonry clean-out covers.

Designed to position rebar in the center of the block with the following dimensions: 9 gauge 3/16″ diameter. The simple Z-shaped wire bridges the cell of the block, while the bends rest on the shell. This design ensures that two rebars stay centered and prevents any movement. It does not interfere with the installation of wire reinforcement.

AVAILABLE IN: 8″, 10″, 12″
Additional sizes are available in 14″ and 16″ – contact us.

FINISHES: Mill Galvanized & Hot Dip Galvanized

Double or Twin Loop Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while the bends rest on the shell. Double loops to hold four rebar and one piece design with no welds and in the following dimensions: 9 gauge 3/16″ diameter.

AVAILABLE IN: 8″, 10″, 12″

Additional sizes are available in 14″ and 16″ – contact us.

FINISHES: Mill Galvanized & Hot Dip Galvanized

The diagonal design securely locks the positioner 1-1/4″ deep into the CMU core, featuring a 9-gauge diameter standard. This design effectively prevents movement during block installation, ensuring the rebar is automatically centered within the core for precise placement.

AVAILABLE IN: 6″, 8″, 10″, 12″

The diagonal design securely locks the positioner 1-1/4″ deep into the CMU core, preventing any movement during block installation. This design ensures the rebar, with a 9-gauge diameter, is automatically centered within the core for precise placement.

AVAILABLE IN: 8″, 10″, 12″, 16″

Maximum strength is achieved by placing bars in the lower 1/3 of the lintel, with dimensions of 9 gauge.

AVAILABLE IN: Suitable for CMU standard sizes of 8″, 10”, 12″

FINISHES:  Mill Galvanized & Hot Dip Galvanized

A bar splice joins two rebar pieces to strengthen reinforced masonry structures. It’s used in new construction, repairs, column and beam reinforcement, concrete piles, and splicing older rebar types.

Tire wire is perfect for securing rebar laps, fastening insulated blankets, and anchoring winter protection to scaffolding. It’s durable and reliable.

AVAILABLE IN: 3.5lb Roll

Used to attach the parapet nailer on the CMU wall.

AVAILABLE IN:
-1/2″ x 6″ w/ Nut & Washer
-1/2″ x 8″ w/ Nut & Washer
-1/2″ x 12″ w/ Nut & Washer
-1/2″ x 16″ w/ Nut & Washer

FINISH: Hot Dip Finish

Rebar & Grouting​