Showing all 17 results
Designed for use with a 4″ grinder and a 5/8”-11w threaded arbor, this wet or dry profiling wheel is ideal for concrete block. The wheel measures 95mm (3-7/8”) in diameter, with a 75mm (3”) diamond section and a 25mm (1”) radius for a smooth bullnose edge.
Weighing under 3 pounds empty, this tool makes grouting faster and easier without pumps or hoses. Designed by a mason for masons. It improves productivity, saves time, and reduces physical strain.
A revolutionary system used to form Clean-Out Covers for High Lift grouting, consisting of a “T-Bolt”, a re-usable “Nut” and a re-usable transparent “Window”. The transparent “Window” clean-out cover is made of polycarbonate, an extremely durable material commonly used in jet fighter canopies.
The Clean-Out Cover system uses a reusable “Nut” and transparent “Window” made of durable polycarbonate, with a hard ABS plastic “T-Bolt” that easily breaks off after use. This efficient solution provides a quick, clean, and cost-effective way to form reinforced masonry clean-out covers.
GATORBACKs, measuring 24″ x 24″ and 0.75 inches thick, offer superior strength and rigidity, working seamlessly with steel stands, scaffold plank, or masonry units without warping or denting like wood. Weighing only 5.5 pounds, a mason or laborer can easily transport 8-10 GATORBACKs at once (4-5 per hand) without strain on their back or wrists.
Adhesive window film protects glass windows and surfaces from stucco, sticky residue, mortar stains, paint overspray, and more. Window Protect is a self-adhesive plastic film that is easy to apply and remove without leaving any sticky residue. Liquid and puncture resistant film provides temporary window protection and is available in blue.
Heavy-duty, 1/4″ thick steel L-bracket with a 24″ angled leg and 1-1/4″ width. Designed for strength and adjustability, featuring 5/16″ diameter holes spaced 1″ on center for versatile mounting. Makes corner pole setup easier and helps bricklayers work more efficiently.
Durable lightweight aluminum L-bracket, 5/16″ thick with a 24″ angled leg and 1-1/4″ width. Precision-drilled 5/16″ holes are spaced every 1″ for easy adjustment and installation. Makes corner pole setup easier and helps bricklayers work more efficiently.
Stone-Lifting clamps are furnished with a 1/2″ stud at the base of the opening for added safety and are capable of lifting up to two tons.
AVAILABLE IN:
-3/4 ton
-1 ton
-2 ton
Stone lifting device to set stone. Call on other sizes!
AVAILABLE IN:
Pin Size & Length
-5/8″ x 4″ 3/4 ton
-3/4″ x 4-1/2″ 1/5 ton
Weighing under 3 pounds empty, this tool makes grouting faster and easier without pumps or hoses. Designed by a mason for masons. It improves productivity, saves time, and reduces physical strain.
Grout Stop prevents grout from falling through the block cores. This product comes in a standard size of CMU X 100′ rolls, offering a convenient, durable solution for masonry projects.
AVAILABLE IN:
-6″ for 8″ CMU x 100′ Rolls
-8″ for 10″ CMU x 100′ Rolls
-10″ for 12″ CMU x 100′ Rolls
A revolutionary system used to form Clean-Out Covers for High Lift grouting, consisting of a “T-Bolt”, a re-usable “Nut” and a re-usable transparent “Window”. The transparent “Window” clean-out cover is made of polycarbonate, an extremely durable material commonly used in jet fighter canopies.
The Clean-Out Cover system uses a reusable “Nut” and transparent “Window” made of durable polycarbonate, with a hard ABS plastic “T-Bolt” that easily breaks off after use. This efficient solution provides a quick, clean, and cost-effective way to form reinforced masonry clean-out covers.
Designed to position rebar in the center of the block with the following dimensions: 9 gauge 3/16″ diameter. The simple Z-shaped wire bridges the cell of the block, while the bends rest on the shell. This design ensures that two rebars stay centered and prevents any movement. It does not interfere with the installation of wire reinforcement.
AVAILABLE IN: 8″, 10″, 12″
Additional sizes are available in 14″ and 16″ – contact us.
FINISHES: Mill Galvanized & Hot Dip Galvanized
Double or Twin Loop Rebar Positioners position two rebar in center of block, the simple Z-shaped wire bridges the cell of the block while the bends rest on the shell. Double loops to hold four rebar and one piece design with no welds and in the following dimensions: 9 gauge 3/16″ diameter.
AVAILABLE IN: 8″, 10″, 12″
Additional sizes are available in 14″ and 16″ – contact us.
FINISHES: Mill Galvanized & Hot Dip Galvanized