Showing all 14 results
METAL STUD FRAMING
Surface mounted in tension without rigid insulation.
AVAILABLE IN: Standard 14 ga x 1-1/4″ width x 6″ long w/ over 3″ of vertical adjustability
FINISH: Hot Dip Galvanized & Special Order Stainless Steel
Triangular ties compatible with Type-III anchors.
AVAILABLE IN: Standard dia. size of 3/16″ and lengths of 3″, 4″, 5″, 6″, 7″ & 9″
FINISHES: Hot Dip Galvanized & Special Order Stainless Steel
(Standard) Surface mounted/ in tension without rigid insulation.
AVAILABLE IN: Standard 14 gauge
FINISHES: Hot Dip Galvanized & Special Order Stainless Steel
Surface mounted/ in tension w/ rigid insulation.
AVAILABLE IN: 14 gauge with leg lengths to accommodate 0”, 1″, 1-1/2″, 2″, 2-1/2″, 3″, 3-½”, 4”, 4-½” insulation
FINISHES: Hot Dip Galvanized & Special Order Stainless Steel
Features a Wide Slot (WS) to accept the WS Adjustable Double Hook, ensuring positive contact with the steel stud backup. This design efficiently transfers compression and tension loads in the veneer to the steel stud backup while also helping to hold the insulation in place. Less labor time with easy drop-in WS ties.
Tapcon® SureTie allows positive contact with concrete or CMU substrates. Compression and tension loads in the veneer are transferred to the backup. This design efficiently transfers compression and tension loads in the veneer to the steel stud backup while also helping to hold the insulation in place. Less labor time with easy drop-in WS ties.
Tapcon® SureTie allows positive contact with wood framing. Compression and tension loads in the veneer are transferred to the backup. This design efficiently transfers compression and tension loads in the veneer to the steel stud backup while also helping to hold the insulation in place. Less labor time with easy drop-in WS ties.
Suretie Thermal Grip Washers have pre-spotting prongs and a stiffened center “Bullseye” ring prevents fastener pull-through, while the flexible perimeter compresses on the surface to reduce tearing and flattens on the insulation’s surface.
EXISTING CONSTRUCTION – Veneer on Concrete/CMU
The RJ711 Anchor with 0″ insulation is designed for tying brick veneer to CMU or concrete substrates, without rigid insulation.
AVAILABLE IN: Standard 14 gauge with a Brick Veneer on Metal Stud no insulation application
FINISHES: Hot Dip & Special Order Stainless Steel
Zamac Hammer Screws offer a unique, one-step nail drive anchor with a phillips-type head and screw thread, ideal for use in concrete, block, brick, stone.
STANDARD SIZE: Standard 1/4″ diameter x 1-1/4″ long
Other lengths available – contact us.
FINISHES: Zamac Alloy body with Carbon Steel Drive Screw & Special Order Stainless Steel
(With Rigid Cavity Insulation) Tying brick veneer to CMU or Concrete Substrate with rigid cavity insulation.
AVAILABLE IN: 14 gauge with leg lengths to accommodate 1″, 1-1/2″, 2″, 2-½”, 3″, 3-½”, 4”, 4-½” insulation.
FINISHES: Hot Dip Galvanized and Special Order Stainless Steel
Zamac Hammer Screws offer a unique, one-step nail drive anchor with a phillips-type head and screw thread, ideal for use in concrete, block, brick, stone.
STANDARD SIZE: Standard 1/4″ diameter x 1-1/4″ long
Other lengths available – contact us.
FINISHES: Zamac Alloy body with Carbon Steel Drive Screw & Special Order Stainless Steel
Tapcon® SureTie allows positive contact with concrete or CMU substrates. Compression and tension loads in the veneer are transferred to the backup. This design efficiently transfers compression and tension loads in the veneer to the steel stud backup while also helping to hold the insulation in place. Less labor time with easy drop-in WS ties.
Brick Veneer Ties
Dovetail Triangular Tie is used to anchor masonry to concrete with a dovetail slot or a hammer pin. Permits horizontal and vertical movement of the masonry wall, while restraining tension and compression.
AVAILABLE IN: Standard 12 gauge x 1″ tail with a 5/16″ hole and triangle diameter of 3/16″.
Triangle sizes: 3″, 4″, 5″, 6″, 7″, 9″
FINISHES: Hot Dip Galvanized & Special Order Stainless Steel