Showing all 7 results
6 mil – Consists of two sheets of high-strength polyethylene film laminated together with a third layer of molten polyethylene – tear resistant.
Call for Special Freight Pricing on Multiple Quantities!
AVAILABLE IN:
-20′ x 100′
-32′ x 100′
-40′ x 100′
Used in applications that require a fire-retardant material, and demand high puncture and tear strengths.
AVAILABLE IN:
-20′ x 100′
Secure poly sheeting to tubular scaffolding.
-Internal ribbing helps to grab poly.
-Saves time and material.
-Reusable.
AVAILABLE IN:
-11″ PVC Long (100/box)
Non-Chloride, Non-Corrosive Set Accelerator for Mortar & Grout
Fully complies with ASTM C 494, Type C and E admixture specifications
Fully complies with AASHTO M 194
AVAILABLE IN:
-5 Gallon Pails
Heats sand piles, brick, block and grade substrates. Temperature under pad: 50 to 60 degrees above ambient air temperature. (15 watts per sq.ft.)
AVAILABLE IN:
-9′ x 9′ – 120 volt
-9′ x 15′ – 120 volt
-Double stitched w/ Grommets in four corners
-Multi-Layer closed cell polyethylene foam w/ Six stay-put buttons
AVAILABLE IN:
-1/2″ x 6′ x 25′
-1/2″ x 12′ x 25′
Applications:
-Sand piles (For steel culvert pipes)
-Heat water drums
-Melt snow & ice on foundations
Specifications:
-36in total length with HD shaft; 500,000 BTU per hour
-For use with propane gas
-Clean burning – Smoke-free and has no fumes (Outdoor use only!)
-Needle valve adjustment
-Excess flow P.O.L. fitting
-10 ft hose and striker included