Showing all 11 results
Mas-n-Flash SA (self-adhering), primerless 40-mil woven coated flashing is a premium, non-asphaltic composite membrane, engineered with a custom-formulated high-content butyl adhesive for superior performance.
AVAILABLE IN: 12″, 18″, 24″ wide x 75 lf rolls
40-mil thick, non-asphalt composite membrane with a proprietary clear adhesive. This adhesive is factory-laminated to polyethylene sheeting, yielding a flexible membrane that is suitable for application to masonry, concrete, steel, gypsum, wood, and polystyrene (also for use with ICF).
AVAILABLE IN: 12″, 16″, 18″, 20″, 24″, 32″, 36″ wide x 75′ rolls
York Seal is a proprietary, self-adhering composite membrane, uniquely combining high strength, low temperature adhesion and high temperature stability into a superior barrier to limit air and moisture transmission.
AVAILABLE IN: 18″, 24″ x 75′
STAINLESS STEEL THRU-WALL
The York 304 Self-Adhering Stainless Steel Flexible Flashing is designed with a flexible 2 mil sheet of type 304 stainless steel, 8 mils of butyl adhesive, and a siliconized release liner for easy application.
AVAILABLE IN: Widths: 12″, 18″, 24″ wide x 50′
12″ wide x 20′. Call on custom sizes.
UniverSeal US-100 Liquid Tape is a polyether-based, moisture-curing, elastomeric sealant that forms a seamless, monolithic exterior surface, ensuring the structure remains watertight.
AVAILABLE IN: Quart tubes
Bond-N-Flash is a stainless steel composite flashing consisting of 2 mils of stainless steel (type 304) bonded to a permanent clear (PSA) adhesive with a removable silicone coated release liner.
AVAILABLE IN: 12″, 18″, 24″ x 75′ rolls
Mighty-Flash™ SA is a self-adhering stainless steel fabric flashing with a removable release liner for easy application. Its clear adhesive is factory-laminated to a Class A polymeric fabric, with a single sheet of Type 304 or 316 stainless steel bonded to one side. Flexible, puncture- and tear-resistant, it’s designed for long-lasting performance throughout the life of the wall.
AVAILABLE IN: 12″, 16″, 18″, 24″, 36″ wide x 60′ rolls
The HB Sealant is an accessory to H&B’s non-asphaltic flashing lines. It is used primarily for lapping and sealing flashings, drip edges, terminations, and end dams, particularly in areas where moisture is likely to be a factor.
AVAILABLE IN: Quart tubes
LAMINATED COPPER FLASHING
Two layers of dense glass fabric and a specially blended asphalt are laminated to a copper core, providing enhanced tensile strength and improved puncture resistance.
Copper weights per square foot are 3oz, 5oz, and 7oz.
AVAILABLE IN: 12″, 18″, 24″ wide x 25 lf rolls
WIRE-BOND® Flashing Mastic is a recommended mastic to seal laps and joints in copper based laminated flashing and Aquaflash Flashing. Clings tightly to wood, slate, metal, asbestos felt, asphalt, concrete and masonry.
AVAILABLE IN: 30 oz tubes